Carbon fiber D-shaped tubes are widely used as reinforcement truss for guitar and bass neck. Please send mail to us about your requirements, we will make best offer to you.
Pultrusion is a technique of continuous production of linear profiles with a constant section. This process has many similarities to extrusion, the main difference is in the feeding system: in extrusion the material is pushed through the matrix (mould), in pultrusion it is extracted from the matrix. This procedure does not allow variations in shape, sections or curves. Products that can be obtained by this process can have sections or thicknesses of up to approximately 15mm, with epoxy resins and up to 70 mm with polyester resins.
Products made with this technology have excellent tensile strength properties due to the linear orientation of the fibres in the direction of axis of the profile; if it is also necessary to have a good transversal resistance, a woven fabric is used as a backing in specific quantities and weights.
Diameter: ext. 29,9 mm, int. 26,1 mm
Length: 1000 mm (1m)
The tubes and other carbon fiber profiles made by Future:
Roll wrapped carbon tube also available:
