News

Carbon fiber cloth is a fiber fabric woven from carbon fiber yarns. Carbon fiber is a high-strength, lightweight material chemically made of carbon atoms. Carbon fiber cloth has a variety of high-performance features, including the following: Lightweight The density of

Carbon fiber composite masts can be manufactured by continuous winding molding, autoclave-vacuum bag molding, female molding, etc. Masts made of carbon fiber composite materials can be made using different processes, but there are certain differences in the performance of masts

Stress is a key factor to consider in mast design. Masts used for maritime navigation are not afraid of compressive stress, but they are most afraid of forward bending stress. When the bending stress is too strong, the mast will

There is another very important process in the production of carbon fiber tubes, which is the application of release agent. Before the carbon fiber tube is pressed and formed, it should be applied on the outside of the mold. The

Semi-dry winding is to add a set of drying equipment to remove the solvent from the impregnated yarn after the fibers are impregnated and on the way to the core mold. Compared with the dry method, the prepreg process and

The winding molding process is to wind continuous fibers (or cloth tapes, prepreg yarns) soaked in resin glue onto a mandrel according to a certain rule, and then solidify and demould to obtain the product. According to the different physical

The winding molding process is to wind continuous fibers (or cloth tapes, prepreg yarns) soaked in resin glue onto a mandrel according to a certain rule, and then solidify and demould to obtain the product. According to the different physical

Carbon fiber rollers are usually made from carbon fiber pipes made by the winding forming process. The carbon fiber winding molding process is to wind continuous fibers (or cloth tapes, prepreg yarns) soaked in resin glue onto a mandrel according

The most common surface treatment method for carbon fiber rollers is spray painting, and the spray painting process must be continuously interspersed with the above-mentioned roughing and finishing procedures. Generally, the procedures are spraying (first pass), rough grinding, spraying (second