News

Advantages of carbon fiber uppers Carbon fiber material has the advantages of being lightweight, wear-resistant, and pressure-resistant. These characteristics are also used in the design of the shoe upper. Carbon fiber uppers are lighter and stronger than traditional materials (such

Carbon fiber floor mats are automobile floor mats that use carbon fiber as the main raw material. Compared with other ordinary floor mats, it has the following obvious advantages. 1. Waterproof and moisture-proof Carbon fiber floor mats have good waterproof

Recently, the latest progress of the “Tianlong 3” (TL-3) large-scale liquid launcher shows that the rocket’s 4200mm large-diameter full carbon fiber composite “rectification” has successfully rolled off the production line. This milestone marks a major breakthrough in China’s development capabilities

1. Cut prepreg According to the drawing of the special-shaped pipe, make an estimate of the material, and then cut the prepreg. 2. Clean the mold surface Clean the mold surface in advance to ensure there is no dust, then

1. Spiral winding During spiral winding, it starts from a certain point on the core film introduced by the wire winding head. After several round-trip movements of the wire winding head, it winds back to the original starting point. It

Carbon fiber cloth is a fiber fabric woven from carbon fiber yarns. Carbon fiber is a high-strength, lightweight material chemically made of carbon atoms. Carbon fiber cloth has a variety of high-performance features, including the following: Lightweight The density of

Carbon fiber composite masts can be manufactured by continuous winding molding, autoclave-vacuum bag molding, female molding, etc. Masts made of carbon fiber composite materials can be made using different processes, but there are certain differences in the performance of masts

Stress is a key factor to consider in mast design. Masts used for maritime navigation are not afraid of compressive stress, but they are most afraid of forward bending stress. When the bending stress is too strong, the mast will

There is another very important process in the production of carbon fiber tubes, which is the application of release agent. Before the carbon fiber tube is pressed and formed, it should be applied on the outside of the mold. The