News

The obvious advantage of carbon fiber material is light weight and high strength. Its density is only 1.7g/cm3, while the densities of commonly used structural materials aluminum and steel are 2.7g/cm3 and 7.85g/cm3 respectively. In comparison, the weight reduction of

Carbon fiber has the characteristics of high strength and low density, which is an ideal lifting rod material. The forming process of carbon fiber lifting rod usually adopts the manufacturing technology of composite materials. Composite materials are materials composed of

Due to the inferiority of the material properties of the traditional metal telescopic rod, it is difficult to reach a certain length. The excellent characteristics of carbon fiber materials break through this limitation, so the telescopic rod can be made

Carbon brazing fiber tube is a kind of high strength, long life, high corrosion resistance, light weight, low density and other advantages, while the color carbon fiber tube not only does not lose the original excellent essence, but also brings

The winding process is one of the main processes for making carbon fiber products. Let’s take a brief look today:           Using wet winding, the carbon fiber tow after dipping is directly wound on the mandrel

Carbon fiber honeycomb panels are composed of carbon fiber panels and honeycomb sandwich structures. They not only have good high strength and high specific stiffness, but also have excellent bending stiffness and higher structural stability. Therefore, they are widely used

The intake temperature of the car engine is very important. If the air temperature is too high, the oxygen content in the air will decrease, which will affect the work and power output of the engine. Generally, the intake pipe

The carbon fiber helmet not only has excellent performance, but also has a streamlined appearance, fine workmanship, smooth lines, no cracks, bubbles and other defects, and different colors can be customized according to needs. So, what are the core advantages

At present, there are three main materials that can be used to make freestyle diving fins: thermoplastic, glass fiber and carbon fiber. Among them, the best performance, the most popular, and the most expensive are carbon fiber fins. What are