News

Neat and smooth edges CNC cutting, neat processing, no burrs on the edges, smooth and beautiful surface. High processing precision Advanced engraving equipment and 5-axis engraving machine are precisely matched and have high precision. All drawings and samples are accepted,

Fully automatic winding process, intelligent angle layup setting, automated program operation, and continuous fiber winding manufacturing process keep the fiber pretension force constant and achieve full play of fiber strength and modulus. According to special working conditions, different resin systems

PMI foam and honeycomb have the same mechanical properties. Since the density of the foam is 10-15% higher than that of the honeycomb, the honeycomb is considered lighter. However, simply comparing the weight of the core material is meaningless; the

If not placed in a completely sealed aluminum foil bag, PMI will absorb moisture in the air. After the foam absorbs moisture, it will reduce the compression creep performance, so that under certain temperatures and pressures, such as in autoclave,

1.Test method 1) Place the standard aluminum plate group in the X-ray uniform radiation field that has been absolutely measured by the air kerma standard, measure the absorbed dose respectively, and obtain the aluminum plate thickness and absorption measurement calibration

In medical X-ray diagnostic equipment, the part where the patient lies horizontally is called the “bed board”. The selection of the medical bed board must not only consider the load-bearing, but also the attenuation of X-ray rays. Traditional medical bed

The carbon fiber winding molding process can be divided into wet winding and dry winding. Wet winding is widely used due to its lower cost and better craftsmanship. Wet winding equipment mainly includes fiber frames, tension control equipment, and dipping

Medical care Independently develop and design various styles of carbon fiber wheelchair parts. Breast X-ray Inspection CF Plate Carbon fiber composite materials have excellent X-ray transmittance, with an X-ray transmittance of 99%. For equipment such as breast machines, which have

As a new synthetic material, carbon fiber is essentially an inorganic polymer fiber with a carbon content higher than 90%. The microstructure of carbon fiber is similar to artificial graphite, which is a turbostratic graphite structure. And carbon fiber, a